The only way to ensure the sharpening of the saw is correct, and the cutting can be continued for more than 1 minute, using the correct tool.

There is nothing like cutting with a sharp chainsaw. The chain easily passes through the wood. Chips were flying, and firewood sticks piled up. Real and true cutting. The sharp chainsaw is not only pleasant to use, but also safer. You are using a chainsaw, not against it.

I hope I can say that I get this result every time I sharpen the saw. Unfortunately for me, this is not the case. Over the years, my technology has been improved, and now I can say that almost all of the sharpening I have done can meet the above high standards. In order to achieve my present purpose, I need to master the three keys to sharpen the saw. That is, use the right tools, use the right technology, and follow the right schedule. In this article, I will discuss the correct tool, and future articles will discuss the correct technique and timetable.

You can use a variety of different tools to keep the chain clear and sharp-some are very simple and some are very complicated, including some specially designed power tools. I prefer to use hand files, mainly because I am too cheap to invest in things that may make my life easier. Whether you are grinding by hand or using some kind of power tool, it is vital to have the correct file size for the chain. If you are unsure of the required file size, please check with the chain manufacturer (or the store that sells your brand saw) to find the right file for you.

If you want to make the cutting surface most effective, the depth gauge used for the rake (also called wind resistance, located in front of each cutter) is also important. This is just a simple measuring tool for measuring the height of the rake and its related tools. It is recommended to use a flat file to lower the rake.

Finally, you need a guide to set the correct angle of the top plate (or top cut surface). Some manufacturers make equipment that can simultaneously file heads and rakes. I have one of them. It works very well, but it is not as good as separating the file and the rake.

It seems that everyone and their brother have come up with another tool that can make sharpening the chainsaw easier. Some of them are attached to the rod and can lock the exact angle, so it is difficult to mess up the file. Others require you to remove the chain from the rod and connect it to a bench grinder for polishing.

All of these tools work well, but the one that received the highest evaluation was a rotating tool with an attachment specifically for sharpening the chain. Many companies make these accessories, and they are relatively cheap. In addition, you don't have to buy another special power tool with only one purpose, but you can use the existing one. If you don't have a spin tool, this is an excuse for you to go out and buy the tool you always wanted.

There is no need to go out and purchase expensive sharpening tools to ensure that the chain is sharpened correctly. Through some practice, you can use the simplest tools to do better or better work. However, if you find that the chain doesn't look sharp or stays for long, then it may be time to study more complicated issues or talk to people in your local chain saw shop.